Built-in amplifier LF/HF: 600/300 W RMS
Built-in amplifier peak LF/HF: 1200/600 W
Frequency response: 58Hz – 20kHz -6dB
Low frequency woofer: 4×8 – 2 coil-neodymium inch
High frequency driver: 4 x 1 – 1.7 coil neodymium inch
Maximum SPL cont/peak: 130/137 dB
Dispersion: 90° x 20° H x V
Input impedance: 22 Kohm
Ac power requirements: 640 VA
Input connector: XLR with loop
Power cord: 5 / 16.4 mm/inch
Net Dimension (WxHxD): 727x510x405 – 28.62×20.39×16.37 mm/inch
Net weight: 45.5/100.31 kg/lb
Transport Dimension (WxHxD): 830x620x520 – 31.49×24.40×20.47 mm/inch
Transport weight: 55.5/122.35 kg/lb



20° vertical dispersion
2 way powered bi-amped true line array, bass reflex design
4×200 mm (8″) custom neodymium woofers with 50mm voice coil (2″)
4×25 mm (1″) neodymium compression drivers and 44mm voice coil (1.7″)
58Hz – 20Khz frequency response
class D 600 Wrms amplifier for LF
class D 300 Wrms amplifier for HF
High efficiency switching power supply
DSP on board with 8 EQ presets, +/- 5db HF level control for accurate amplitude shading
control panel with XLR input and link, volume, presets, HF level, HP filter, ground-lift
90° horizontal waveguide with near flat wavefront up to 18Khz
18 mm (3/4″) birch plywood enclosure, with handles and mechanical hardware for suspension
Mechanical hardware for suspension with 10:1 safety factor
different configurations allowed by a complete range of optional accessories
Performance comparable to high-end touring line arrays at an extremely competitive cost
the extended frequency response at 58Hz allows the use in medium SPL applications without additional subwoofers.